Epygi Technologies Release Note Quadro2x 5.3.23, Edition 1
PAGE 2 5-Jun-13
2 Requirements
2.1 Hardware requirements
Attention: The 5.3.23 software can be used on almost all Quadro2x units. The exception to this is
for older Quadro2x models that have only 32MB of NAND flash memory. The following hardware
versions support 5.3.x: SASY-MICRO-0101-0002, SASY-MICRO-0101-0101, SASY-MICRO-0102-
xxxx, SASY-MICRO-0103-xxxx
Additional details are provided in Section 7: Upgrading Instructions
2.2 Software requirements
Attention: The software upgrade 5.2.x to 5.3.x can be done from 5.2.9 and higher 5.2 versions.
Attention: The software upgrade 5.1.x to 5.3.x can ONLY be done from 5.1.38 and higher 5.1
versions. Before updating to 5.3.x the unit should be updated to 5.1.38 or higher 5.1 version first.
2.3 Supported SIP phones
Listed below are the Epygi Supported SIP phones with the corresponding firmware versions that
are tested and recommended for use with Quadro2x 5.3.23 SW. All the phones in this list can be
automatically configured to work with Quadro2x 5.3.23 SW
.
Please Note: For the most of phones Quadro supports both the PnP and the auto-configuration
options. For some specific phones the auto-configuration option is supported only.
Using of the configuration options on each specific SIP phone is described in detail in the
Configuring Epygi Supported IP Phones on Quadro document.
Please Note: Any known issues and limitations regarding usage of Quadro2x telephony services
and features on these SIP phones are described in detail in the Quadro Features on Epygi
Supported IP Phones document.
Both mentioned documents are available at www.epygi.com and can be found under the Channel’s
Portal.
Application: snom300-SIP 8.4.35
Application: snom320-SIP 8.4.35
Application: snom360-SIP 8.4.35
Application: snom370-SIP 8.4.35
Application: snom710-SIP 8.7.3.15
Application: snom720-SIP 8.7.3.15
Application: snom760-SIP 8.7.3.15
Application: snom821-SIP 8.4.35
Application: snom870-SIP 8.4.35
Application: snomMP-SIP 8.4.35
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals