Quadro Quadro6L Installation Guide download pdf (Page 33)

Quadro6L/4L/2x2 Manual I: Installation Guide Step 2: Configuring the Quadro

Quadro6L/4L/2x2; (SW Version 5.3.x and higher) 33

Click on the IP Line number to enter the IP Lines Settings page.

Fig. l- 33: IP Line Settings page

Select the SIP Phone radio button. Select the SIP IP phone model from the Phone Model

drop-down list.

Please Note: If your IP phone is not listed in the Phone Model drop-down list, select the

Other option from the list to configure the SIP phone manually. The SIP phone’s configura-

tion is different dependent on the SIP phone model. For more information about SIP Phone

configuration, refer to the SIP phone manual or user’s guide.

Insert the SIP Phone’s MAC address in the corresponding fields. The MAC address of an

IP phone is usually printed on the back of the phone’s base unit.

In the Line Appearances text box, enter the number for simultaneous calls supported by

the SIP IP phone – which is the sum of the number of active and held calls. For example, if

this field is set to 1, only one active call is possible to have on the phone and making or ac-

cepting a second call while the other is on hold will not be allowed. Note, that this number

depends on the phone brand and model, and cannot exceed the number of simultaneous

calls supported by the phone.

Username and Password are required to be inserted for this selection. They should match

on both Quadro and SIP phone for a successful connection. The Password field is

checked against its strength and you may see how strong is your inserted password right

below that field. To achieve the well protected strong password minimum 8 characters of

letters in upper and lower case, symbols and numbers should be used. If you are unable to

define a strong password, press Choose Generated Password to use one of system de-

fined strong passwords.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 56 57

No comments

Quadro Quadro6L Installation Guide Page 33