Quadro6L/4L Manual I: Installation Guide Requirements
Requirements
• One 120/240 VAC power outlet in close proximity to the Quadro.
• One RJ45 Ethernet 10/100 broadband Internet connection.
• At least one RJ11 telephone connection is recommended to connect the Quadro to
the PSTN network.
• At least one IP phone with an RJ45 connector connected to the Quadro WAN port
directly or through a hub or switch.
• One CAT 5 Ethernet cable with an RJ45 connector to connect to the Quadro LAN
port.
• One PC with a 10/100 Mbps Ethernet card or adapter installed.
• TCP/IP network protocol installed on each PC.
• For optimal results, Internet Explorer 5.5 or higher, or Netscape Navigator 4.7 or
higher are recommended.
Please Note: The Quadro6L/4L is shipped with one RJ11 cable and one straight RJ45
CAT 5 cable. If the LAN connector of the Quadro connects to a hub or switch, a crossover
cable may be required.
Quadro6L/4L; (SW Version 5.2.x) 7
Comments to this Manuals