Quadro Quadro4L Installation Guide download pdf (Page 34)

Quadro6L/4L Manual I: Installation Guide Step 2: Configuring the Quadro

The Transport drop down list is used to select the SIP protocol transport layer - UDP, TCP

or TLS. For TLS you may activate the TLS certificate update mechanism from IP Phone to

obtain the latest certificate generated by the Quadro.

The Use Session Timer enables the SIP session timer for the corresponding IP line. This

checkbox enables advanced mechanisms for connection activity checking. This option al-

lows both user agents and proxies to determine if the SIP session is still active. Reset the

SIP Phone. After restart, the appropriate configuration will be automatically downloaded

from the Quadro to the SIP Phone.

Some SIP phones require only reboot for configuration download. Other SIP Phones may

require additional configuration. For example, by default IP Dialog SIP Tone II is in non-

auto-provisioning mode, therefore the user has to manually enable it on the phone.

To make sure the IP line is configured properly, do the following:

• Go to Quadro Status – SIP Registration status – Registered IP Lines to see if

IP Line registration is successful.

• Dial *74 to get the line information.

• Make outgoing and accept incoming calls.

Quadro6L/4L; (SW Version 5.2.x) 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

No comments

Quadro Quadro4L Installation Guide Page 34