Quadro Quadro4L Installation Guide download pdf (Page 53)

Quadro6L/4L Manual I: Installation Guide Configuring Quadro Extensions

Fig. l- 49: Extensions Management - Edit Entry – SIP Settings page

• Enter the SIP registration number displayed in the column Ext# into the text field

Registration User Name.

• In the Password field, enter the password you specified when registering at the

SIP server and confirm it in the field below.

• In Registration SIP Server, the selected SIP server address must be entered. If

you use the Epygi SIP server, you may enter sip.epygi.com.

• Most SIP server providers, including Epygi, use port 5060 as the Registration

SIP Port. You may leave the default entry as is.

• Select Registration on SIP Server if you want to establish and receive IP calls.

• Click the Save button to activate the settings.

Other settings of the extension might be also modified from Extensions Management –

Edit Entry page (refer to the Manual II - Administrator’s Guide).

Your settings will be verified, then after a few seconds the Extensions Management page

is updated with the changes as shown in the below example, Fig.I-50.

Fig. l- 50: Extensions Management page

Quadro6L/4L; (SW Version 5.2.x) 53

1 2 ... 48 49 50 51 52 53 54 55 56 57

No comments

Quadro Quadro4L Installation Guide Page 53