Quadro Quadro6L Installation Guide download pdf (Page 39)

Quadro6L/4L/2x2 Manual I: Installation Guide Step 2-B: Using Key System Emulation

Quadro6L/4L/2x2; (SW Version 5.3.x and higher) 39

tem Emulation page from the Telephony menu of the Quadro’s Web Management. Push

the corresponding SLA line number to get its configuration page.

Fig. l- 35: Key System Emulation – SLA page

The SLA Name text field is used to insert the preferred name for the corresponding SLA

line. On the IP phones with the display available, this name is visible on the display next to

the programmable key.

A group of manipulation radio buttons allow you to configure the SLA line:

• Inactive - disables the corresponding SLA line.

• PSTN - allows you to assign the SLA line to the available PSTN lines on the Qu-

adro. This selection disappears when there are no more unassigned PSTN lines

available.

This means that each FXO line on the Quadro6L/4L is assigned to the SLA line

and all incoming calls on that FXO line will be ringing on the corresponding SLA

line. Along with this, the programmable key on the IP phone responsible for that

SLA line will be blinking during the incoming call. Any user who has the pro-

grammable key blinking on his IP phone will be able to pick up the incoming call.

Attention: By assigning a PSTN line to the SLA line, it becomes unavailable for

calls through Auto Attendant or Call Routing Table.

• SIP - used to assign the SLA line to the certain SIP account. This selection has

two sub-selections:

o Custom Settings - used to define a SIP server and SIP registration para-

meters. The following parameters are required for this selection:

Username - the registration username on the SIP server.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 56 57

No comments

Quadro Quadro6L Installation Guide Page 39