Quadro Quadro4x Installation Guide download pdf (Page 16)

Quadro Manual I: Installation Guide Step 1: Installing the Quadro

Please Note: The Admin PC is connected to the Quadro LAN port to access the Web

Management of the Quadro. After the initial configuration has been completed, this PC can

then be moved to the LAN and connect to the Quadro over a switch (see Fig.I-7). You also

may reach the Quadro for its first configuration from an Admin PC within the LAN, but this

may cause collisions in case of non-fitting IP addresses and competing DHCP servers.

Fig. I-8: Configuration: Quadro used as Internet Access Router with a switch connected to the LAN port

If the user already operates a router connected to the cable or DSL modem and has de-

vices behind the router, the router is disconnected from the modem and the Quadro is in-

serted between the modem and the router (see Fig.I-9). The Quadro serves as an Internet

access router and DHCP server. The Quadro will be configured to connect directly to the

Internet through a cable or DSL modem. The router then is connected to the Quadro LAN

port.

Fig. I-9: Configuration: Quadro used as Internet Access Router with a router connected to the LAN port

Please Note: If there are services configured behind the existing router such as Web or

gaming servers, these services also must be configured through the Quadro firewall for

proper operation. Refer to the Administrator’s Guide for more information.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 61 62

No comments

Quadro Quadro4x Installation Guide Page 16