Quadro Quadro4x Installation Guide download pdf (Page 45)

Quadro Manual I: Installation Guide Step 4: Making/Receiving Calls

Step 4: Making/Receiving Calls

Please Note: The Quadro default settings are sufficient to make SIP phone calls. It is

not necessary to make any changes unless the user wants to create new SIP exten-

sions on the Epygi SIP Server, create a private directory for several Quadro units, or

use alternate VoIP services. Refer to the Administrator's Guide for more information

on these configurations.

• To make a call to the PSTN, dial 9 and the local phone number. You may accelerate

the dialing process by adding the # after the last digit, e.g., 9 + 972-661-1335#. You

are making a local call through the PSTN. It is assumed an FXO phone line is con-

nected to the Quadro.

Please Note: In case you had changed the default value of the PSTN Access Code

in the System Configuration Wizard to something other than 9, you will need to dial

your chosen digit instead.

• To make a VoIP call to a user on the remote Quadro, lift the handset and dial 8 + SIP

Address (of the user on the remote Quadro) + #. You are calling over the Internet to a

remote user.

Please Note: Epygi has a SIP Address test line to test newly provisioned Quadro de-

vices. Call 8 + 99 + # and you will hear a message if the call was successful. This

message comes from a Quadro in one of our offices. SIP Addresses are described be-

low.

• Received IP calls will ring the extensions automatically.

• Received PSTN calls will be directed to the Quadro’s default Auto Attendant (00).

Using the Default SIP Addresses

Making Internet IP calls is simple with the Quadro. By default, every standard (analog) tele-

phone connected to one of Quadro’s phone lines functions as an IP phone. If you open the

Extensions Management page, you will see that some SIP Addresses are available, one

attached to the Auto Attendant and one to each extension. These SIP addresses are the IP

telephone numbers of these extensions. Anyone with a Quadro or any other SIP IP device

on the Internet can place a call to [email protected] and the call will ring the

associated extension.

Under Extensions Management, you may edit the Display Names to assign extensions to

people.

Fig. I-38: Extensions Management page

To do so, click on the box in the first column next to the extension to edit and click the Edit

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

No comments

Quadro Quadro4x Installation Guide Page 45