Quadro Quadro16xi Installation Guide download pdf (Page 10)

Quadro Manual I: Installation Guide Hardware Overview

1 Power supply socket. Use only the power adapter delivered with the Quadro.

2 LINE sockets to connect the Quadro to the PSTN network using standard analog

phone service. These are FXO (Foreign Exchange Office) analog ports.

3 In the event of a power failure, PHONE 1 is connected to LINE 1, allowing the phone

to send/receive phone calls directly to the PSTN network. PHONE 1 is powered by

the PSTN.

Please Note: Only LINE 1 is connected to PHONE 1 during a power failure. The

other LINE and PHONE ports are not connected together.

4 PHONE sockets with RJ11 connectors enable connectivity of regular analog tele-

phones. These are FXS (Foreign Exchange Station) analog ports. As a factory de-

fault, the phones connected to PHONE sockets 1-3 (1-2 for Quadro2x) are configured

as voice extensions. PHONE socket 4 is preconfigured for a fax machine.

5 RJ45 socket to attach to the Local Area Network (LAN) via an Ethernet CAT 5 cable.

If a PC is connected directly to this socket, a straight cable is used. If an Ethernet

hub, router or switch is used; a crossover cable may be required.

6 RJ45 socket to attach the Internet Uplink (WAN) via an Ethernet CAT 5 cable.

7 The USB socket enables connectivity of USB flash memory providing expansion for

additional voice mails and record data. Refer to the Administrator’s Guide for sup-

ported devices.

8 The Reset button may be used in two ways: (1) to initiate a normal reset or (2) to

carry out a factory reset. A normal reset is executed by pressing the Reset button

with a paper clip for an instant.

Pressing the reset button and holding it down for seven seconds or more will execute

a factory reset. This will restore the factory defaults and clear all settings including

the IP address and the administration password you entered.

Please Note: A Factory Reset forces the default LAN IP address of 172.30.0.1 and

default admin password of 19.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.1.x) 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 56 57

No comments

Quadro Quadro16xi Installation Guide Page 10