Quadro Quadro16xi Installation Guide download pdf (Page 19)

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro

Step 2: Configuring the Quadro

Quadro IP PBXs with Ethernet WAN up-

link do not require further

configuration in two cases:

• The Quadro is connected behind a basic router that has no con-

flicts with the STUN protocol.

• The Quadro is used as the Internet access router and your

ISP supports DHCP. There are no other router devices between

the Quadro and the DSL or cable modem and you get the IP ad-

dress assigned automatically by the ISP.

Simply power up the modem. Once the modem is up and running (after a

few minutes) power up the Quadro.

Verify functionality of both IP and PSTN calls:

• PSTN telephony: Make an outbound PSTN call and arrange to receive an in-

coming call. The incoming PSTN calls will be routed to the Auto Attendant by

default, and the caller has to enter a valid extension number, e.g., 11, followed

by the # sign to reach a phone connected to the first PHONE port of the

Quadro.

• IP telephony: Dial 899# and you will hear a voice message that confirms you

have successfully established an IP call. If this call is not successful, go to

Appendix: Checking the Connections

for troubleshooting.

You may customize the following settings by connecting the PC to Quadro's LAN port and

logging in to the Quadro’s Web Management:

• Bandwidth - to regulate the number of calls allowed by the Quadro to avoid

degradation in low bandwidth conditions.

• Time/Date - to ensure the correct time and time zone are used for call records.

• Regional Settings - if your Quadro is located outside the United States, it is

important to properly configure your line connections to the PSTN in your loca-

tion.

• Firewall - if your Quadro is connected behind a router with its own firewall ser-

vice running, disable the firewall to make Quadro accessible for management

purposes.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.1.x) 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 56 57

No comments

Quadro Quadro16xi Installation Guide Page 19