Quadro Quadro16xi Installation Guide download pdf (Page 29)

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro

PPP/PPTP Configuration

Enter the IP address of the PPTP server into the PPTP Server text field.

Choose the encryption for the traffic over the PPTP interface from the Encryption drop

down list.

Authentication Settings require the Username and the Password used for the authentica-

tion on the ISP server.

Dial Behavior radio buttons:

• Dial Manually - if this radio button is activated, a button will be displayed in the main

management window that serves to switch the Internet connection on/off. When ac-

cessing the Internet, every station of the connected LAN has to connect to Quadro

first.

• Always connected - Quadro stays in the always connected mode. This will allow

Quadro always remain online in the network.

The IP Address Assignment field is used to specify the external IP address given to the

Quadro. Usually it is a dynamic address but in some cases you may be given a static IP

address.

Fig. I-25: PPP/PPTP Configuration page

If your ISP assigns a dynamic IP address, activate the Dynamic IP Address radio button,

otherwise activate the Fixed IP Address radio button and enter the IP address you were

assigned by your ISP.

Keep Connection alive checkbox enables keeping the connection alive by sending control

packets dedicated for the link state verification.

Click the Next button to display the WAN Interface Configuration page.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.1.x) 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 56 57

No comments

Quadro Quadro16xi Installation Guide Page 29