Quadro Quadro16xi Installation Guide download pdf (Page 30)

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro

WAN Interface Configuration

If your ISP requires a specific MAC address, (for example, for authentication), it can be en-

tered on this page. The required MAC address can be entered into the User defined field.

If a specific MAC address is not required, leave the default selection This device selected.

Fig. I-26: WAN Interface Configuration page

Use the MTU drop down list to select the maximum packet size on the Ethernet (in bytes).

Click Next to display the DNS Settings page.

DNS Settings

For DNS, the selection is set to Dynamically by Provider. When using a static IP address,

fixed values must be entered.

Fig. I-27: DNS Settings page

The Quadro will suggest the correct settings. If Dynamically by Provider is selected, the

DNS server settings will be set automatically whenever a connection to the Internet is es-

tablished.

If Fixed Nameserver Address is selected, manually enter the IP addresses provided by

your ISP for the name server and the alternative name server.

Clicking Next shows the summary page of the Internet Configuration Wizard.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.1.x) 30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 56 57

No comments

Quadro Quadro16xi Installation Guide Page 30