Quadro Quadro4x Installation Guide download pdf (Page 34)

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro

In the Line Appearances text box, enter the number for simultaneous calls supported by

the SIP IP phone – which is the sum of the number of active and held calls. For example, if

this field is set to 1, only one active call is possible to have on the phone and making or ac-

cepting a second call while the other is on hold will not be allowed. Note, that this number

depends on the phone brand and model, and cannot exceed the number of simultaneous

calls supported by the phone.

Username and Password are required to be inserted for this selection. They should match

on both Quadro and SIP phone for a successful connection. The Password field is

checked against its strength and you may see how strong is your inserted password right

below that field. To achieve the well protected strong password minimum 8 characters of

letters in upper and lower case, symbols and numbers should be used. If you are unable to

define a strong password, press Choose Generated Password to use one of system de-

fined strong passwords.

The Transport drop down list is used to select the SIP protocol transport layer - UDP, TCP

or TLS. For TLS you may activate the TLS certificate update mechanism from IP Phone to

obtain the latest certificate generated by the Quadro.

The Use Session Timer enables the SIP session timer for the corresponding IP line. This

checkbox enables advanced mechanisms for connection activity checking. This option al-

lows both user agents and proxies to determine if the SIP session is still active.

The Use Template drop down list is used select a preconfigured custom template for the IP

phone. When the “Use default” is selected in this drop down list, the template selected on

the IP Line Settings page will be used.

The Enable Hot Desking Capability checkbox is used to enable the Hot Desking feature

on the corresponding IP line (see Manual II – Administrator’s Guide for more details).

The Hot Desking Automatic Logout section is used to configure Hot Desking functionality

expiration on the corresponding IP line. This may be useful when someone who logged in

to the public phone with the extension attached to this line forgot to log out after using it.

With this option enabled, once the expiration time arrives, the extension will automatically

log out from the public phone.

The following options are available:

• Never – the extension will never expire and will remain logged in to the public

phone.

• After the defined period of time – requires the period after which the extension

will automatically log out from the public phone.

• At the certain moment – requires the moment (hour and minute) when the ex-

tension will automatically log out from the public phone.

Reset the SIP Phone. After restart, the appropriate configuration will be automatically

downloaded from the Quadro to the SIP Phone.

Please Note: For automatic configuration, some SIP phones may require additional actions

to follow the restart. For example, by default the IP Dialog SIP Tone II is in a non-auto pro-

visioning mode, so it should be manually enabled on the phone. Refer to the user’s manual

of the corresponding SIP phone for instructions on performing a factory reset or reboot on

any of the supported phones, what additional configurations are required for a specific SIP

phone, and how to manipulate with the GUI.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Comments to this Manuals

No comments

Quadro Quadro4x Installation Guide Page 34

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro4x