Quadro Quadro4x Installation Guide download pdf (Page 6)

Quadro Manual I: Installation Guide About This Installation Guide

About This Installation Guide

This Installation Guide explains the installation of the Quadro IP PBXs of Quadro2x/2xi,

Quadro4x/4xi and Quadro16x/16xi series. The Quadro models differ both in their feature

sets and the number of phone lines and extensions that are supported:

• Quadro2x offers 1 phone line (FXO), 2 phone extensions (FXS) and 1 Ethernet WAN

port

• Quadro2xi offers 1 phone line (ISDN), 2 phone extensions (FXS) and 1 Ethernet

WAN port

• Quadro4x supports 2 phone lines (FXO), 4 phone extensions (FXS) and 1 Ethernet

WAN port - a special version of Quadro4x offers 2 additional FXO lines

• Quadro4xi supports 1 phone line (ISDN), 4 phone extensions (FXS) and 1 Ethernet

WAN port - a special version of Quadro4xi offers 2 additional ISDN lines

• Quadro16x supports 4 phone lines (FXO), 16 phone extensions (FXS) and 1 Ethernet

WAN port

• Quadro16xi supports 3 phone lines (ISDN), 16 phone extensions (FXS) and 1

Ethernet WAN port

The installation procedure for all Quadro IP PBXs is the same. Throughout this Installation

Guide, the standard edition of the Quadro4x with two FXO ports is shown as the reference

system.

This Installation Guide gives step-by-step instructions to provision the Quadro and config-

ure the phone extensions with the Epygi SIP Server. After successfully configuring the

Quadro, a user will be able to make SIP phone calls to remote Quadro devices, make local

calls to the PSTN and access the Internet from devices connected to the LAN.

This Installation Guide neither describes the PBX, Auto Attendant, Call Relay, and Voice

Mail features of the Quadro nor does it provide advanced firewall and VPN configuration in-

formation. For these features, refer to the Administrator's and Extension User's Guides.

Step 1: Installing the Quadro

explains the connection of cables and devices to the

Quadro.

Step 2: Configuring the Quadro

describes the configuration steps necessary to integrate

the Quadro into your network environment.

Step 2-A: Using IP Lines

explains how to configure IP lines on the Quadro IP PBX and to

connect IP phones to become functional in the Quadro’s LAN.

Step 2-B: Using Receptionist

refers to the document describing Receptionist’s configura-

tion on the Quadro.

Step 2-C: Using ISDN Lines

explains how to configure ISDN trunks and to define a de-

fault outgoing MSN.

Step 3: Registering on Epygi’s Technical Support

shows you how to access the Epygi

Technical Support Center and the Epygi SIP Server.

Step 4: Making/Receiving Calls

explains how to enable the Quadro’s various telephony

features.

Appendix: PC DHCP Settings

explains how to configure your PC to access the Quadro

Configuration GUI.

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 6

1 2 3 4 5 6 7 8 9 10 11 ... 61 62

Comments to this Manuals

No comments

Quadro Quadro4x Installation Guide Page 6

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro4x