Quadro Quadro16xi Installation Guide Page 90
- Page / 150
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Quadro Manual II: Administrator's Guide Administrator’s Menus
Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 89
ISDN Settings
igitization of the telephone network, which permits voice, data, text, graphics, music, video, and other source material to
) and one D channel
l service operates at 16
onnected to the Quadro, it should be configured as a user. Quadro supports the MSN
multiple numbers from the CO, and two simultaneous calls can take place at a
k and their signaling.
of your Quadro. Quadro2xi and Quadro4xi models have only one ISDN trunk
ISDN trunks available. The ISDN trunks shared on other devices (if any) are also
ing input options:
adro and their settings (trunk name and interface types).
copi
The tings functional link restores the
efault signaling settings o the selected ISDN trunk(s).
The Integrated Services Digital Network (ISDN) is distinguished by digital telephony and data-transport services offered by regional telephone
carriers. ISDN involves the d
be transmitted over existing telephone wires. The ISDN Basic Rate Interface (BRI) service offers two B channels (voice transfer
(signaling data transfer). The BRI B-channel service operates at 64 kbit/s and is meant to carry user data. The BRI D-channe
kbit/s and is meant to carry control and signaling information, although it can support user data transmission under certain circumstances.
The ISDN service allows Quadro act as a user or as a network. If connected to a private PBX, the Quadro should be configured in the network
mode. If an ISDN trunk from the CO (Central Office) is c
(Multiple Subscriber Number) service, i.e., it can be subscribed to
time.
The ISDN Trunk Settings page is used to configure the ISDN trun
The number of available ISDN trunks is dependent on the type
available. Quadro16xi and the special edition of Quadro4xi have 3
listed on this page.
This page offers the follow
e TrTh unk Settings table lists the available ISDN trunks on the Qu
The Start and Stop functional links are used to start/shutdown
the selected ISDN trunk(s). When an ISDN trunk is in a
shutdown state, ISDN calls cannot be placed or received.
The Restart functional link is used to bring channel(s) to the
initial idle state on both sides. When applying one of these
options, any active traffic on the channel(s) will be terminated.
e Copy to Trunk(s) Th functional link displays a page used to
choose a trunk to which selected trunk’s settings should be
ed to.
Restore Default Set
f d
Fig. II-155: ISDN Settings page
interface type and the connection type of the selected trunk(s).
he Network interfaces. If the ISDN port of the Quadro is connected to
the CO then User interface type should be selected. If the ISDN port of the Quadro is connected to the PBX then Network interface type should be
lease note: By default, only User mode is available in the
TP (Point to Point)
In case of connection to the CO (User interface type is
selected on Quadro) choose this option if only Quadro is
connected to the ISDN trunk from CO (no other ISDN
devices are connected to the particular ISDN trunk from CO
besides the Quadro).
In case of connection to the PBX (Network interface type
is selected on Quadro) choose this option if only the PBX is
connected to the ISDN trunk from the Quadro (no other
ISDN devices are connected to the particular ISDN trunk
from the Quadro).
In both cases, with this selection, Quadro sets the TEI to
manually mode assigning the default value of 0. If needed,
that value can be changed later in the Advanced Settings
Clicking on the corresponding ISDN trunk will lead to the ISDN wizard where trunk’s ISDN signaling settings can be configured. The ISDN Wizard
icons sts of several pages.
The ISDN Wizard – ISDN Settings allows you to choose the
The Interface Type drop down list allows you to select between the User and t
selected (in that case Quadro acts as a CO for that PBX).
P
Interface Type drop-down list. To activate Network mode on
Quadro2xi/4xi/16xi, enable the Network mode support on the
ISDN Network Mode hidden page. To access the page, type
isdnnetworkmode.cgi in the browser’s address bar.
The Connection Type manipulation radio button group allows
you to choose the connection type for the selected trunk(s):
P
•
•
•
page of ISDN Wizard.
Fig. II-156: ISDN Wizard – ISDN Settings
PTMP (Point to Multi Point)
- Edition 1, June 2011 1
- Table of Contents 2
- Quadro’s Graphical Interface 6
- Recurrent Buttons 7
- Recurrent Functional Buttons 7
- Administrator’s Menus 8
- System Security Management 12
- • User Rights Management 13
- • IP Line Settings 13
- • Firewall/NAT 13
- Network Status 15
- Memory Status 19
- Hardware Status 20
- SIP Registration Status 20
- IP Lines Registration Status 20
- License Status 21
- IP Routing Configuration 21
- Configuration Management 23
- Time/Date Settings 28
- Mail Settings 29
- SMS Settings 30
- Firmware Update 30
- Automatic Firmware Update 32
- Networking Tools 33
- SNMP Settings 34
- Diagnostics 35
- System Logs 35
- Fig. II-64: Features page 37
- Upload Language Pack 38
- User Rights Management 39
- Users Menu 41
- Extensions Management 41
- User Extension Settings 43
- Call Park Extension Settings 49
- Attendant Extension Settings 55
- • PSTN – calls to PSTN 56
- • User Input 58
- • No input 58
- • Signs (“*” and “#”) 58
- Add Multiple Extensions 61
- Extension Codecs 62
- Call Park Service 63
- Recording Box 64
- Receptionist Management 65
- * key combination (see 67
- Authorized Phones Database 69
- Call Back Services 70
- Telephony Menu 72
- Call Statistics 72
- RTP Statistics 75
- FAX Statistics 76
- SIP Settings 76
- Host aliases for SIP 77
- RTP Settings 77
- NAT Traversal Settings 78
- Line Settings 81
- Onboard Line Settings 81
- IP Line Settings 82
- Supporte 84
- IP Phones Templates 85
- Phones Logo 86
- FXS Gateway Management 87
- Loopback Settings 88
- Hot Desking 88
- FXO Settings 89
- Gain Control 95
- SIP Tunnel Settings 95
- • Failover Rea 100
- Local AAA Table 103
- Global Speed Dial Directory 104
- Allowed C 104
- Best Matching Algorithm 106
- VoIP Carrier Wizard 108
- RADIUS Client Settings 109
- Voice Mail Common Settings 111
- Dial Plan Settings 112
- 3PCC Settings 112
- RTP Streaming Channels 113
- Call Recording Settings 113
- Advanced PPP Settings 117
- VPN Configuration 117
- Dynamic DNS Settings 124
- Firewall and NAT 125
- Advanced Firewall Settings 125
- IP Pool 128
- IDS Log 130
- Network Menu 131
- DNS Settings 131
- DNS Server Settings 131
- Registration Form 134
- Voice Mail Profiles 135
- Administrator’s Logout 139
- Welcome 140
- Administrator Settings 141
- Extension Settings 147
- EPYGI TECHNOLOGIES, LTD 149
- Software License Agreement 149
Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro16xi
(2 pages)
(11 pages)© 2020, manymanuals.com. All rights reserved. | 0.724 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals