Quadro Quadro16xi Installation Guide download pdf (Page 15)

Quadro Manual I: Installation Guide Step 1: Installing the Quadro

LAN/WAN Connection Options

•

A Quadro IP PBX with an Ethernet WAN port behind a router, which is connected

to a cable or xDSL modem.

Fig. I-6: Configuration: Quadro behind a router

In this configuration (Fig.I-7), the IP router typically acts as a DHCP server for the LAN and

assigns the IP addresses to the PCs and other devices. The Quadro can be connected

through its WAN port directly to one of the router's LAN ports and will get an IP address

from the router. By default, the Quadro acts as a DHCP client on the WAN port.

Please Note: Since Quadro uses STUN by default, it will work with most basic

routers without any further configuration.

Please Note: Initially, the Admin PC must be connected to the Quadro LAN port to access

Web Management of the Quadro. Later, this PC can be moved to the router’s LAN. The

Quadro Web Management can be accessed from any PC in the router’s LAN as soon as

the firewall is disabled on the Quadro.

• A Quadro IP PBX used as an Internet Access Router, connected directly to

the Internet

Fig. I-7: Configuration: Quadro used as Internet Access Router

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.1.x) 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

No comments

Quadro Quadro16xi Installation Guide Page 15