Quadro SW-Version 4.1.x User's Guide download pdf (Page 23)

Quadro Manual III: Extension User's Guide Extension User’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 23

The Address List for the Group page contains a table of

addresses where new address may be added to the group

and existing ones may be edited or deleted.

The Add functional link moves to the Address List for the

Group – Add Entry page where new address may be

defined.

Fig. III-8 Addresses List page

Address List for the Group – Add Entry page consists of he

following components:

Call Type lists the available call types:

• PBX - local calls between Quadro extensions and Auto

Attendant

• SIP – calls through a SIP server

• Auto – used for undefined call types. The destination

(independent on whether it is a PBX number or SIP

address) will be reached through Routing.

The Address text field is used to define the address that

ought to be included in the group. The value in this field is

strictly dependent on the Call Type defined in the same

named drop down list. If the PBX call type is selected, the

Quadro extension number should be defined in this field. For

the SIP call type, the SIP address should be defined.

Fig. III-9 Add Address page

To Configure a Group

1. Press Add in the Group List page. Group List - Add Entry page will be displayed in the browser window.

2. Fill in the Group Key and Group Name (optionally) in the same named field.

3. Press Save.

4. Click on the link in the row corresponding to the newly created Group.

5. Press Add in the Address List for the Group page. Address List for the Group – Add Entry page appears.

6. Choose a Call Type from the corresponding drop down list.

7. Define the group member address in the Address text field.

8. Press Save.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

No comments

Quadro SW-Version 4.1.x User's Guide Page 23