Quadro Quadro16xi Installation Guide download pdf (Page 34)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 33

SNMP Settings

The Simple Network Management Protocol (SNMP) is an application layer protocol that facilitates the exchange of management information

between network devices and is used by network administrators to manage network performance, find and solve network problems, and plan for

network growth.

On Quadro, SNMP agent is running to allow administrators to remotely manage Quadro’s network and the device’s configuration. Remote

administration is being performed by means of special SNMP monitoring programs (SNMP Manager), which can automatically feedback by the

certainly configured actions on some events on the Quadro or remotely modify Quadro’s settings.

SNMP Settings page is divided into two pages: Global SNMP Settings and SNMP Trap Settings.

Global SNMP Settings are used to enable the SNMP agent on the Quadro, to select the SNMP protocol version for communication with the

administrating application and to define the community for administrating application to connect the Quadro.

Enable SNMP checkbox is used to enable SNMP agent on the Quadro.

System Location text field requires optional information to describe the network where SNMP management is performed.

System Contact text field requires optional information about

the contact person responsible for the SNMP management in

the defined network. Field may indicate the point person’s name,

email address, phone number or other contact information.

Enable SNMP v1 / 2c checkbox is used to enable SNMP v1/2c

protocol version for the messaging between Quadro’s SNMP

agent and the administrating application. If this checkbox is not

selected, SNMP v1 will be implied.

SNMP v1 / v2c Read-Only Community text field is used to

insert the community description (public, private, etc.) for the

read-only management (like gathering information (events,

statistics, etc.) about Quadro’s). Field may contain some kind of

password which should be matching both on Quadro and on the

administrating application for successful SNMP management.

Enable SNMP v1 / 2c Read-Write Access checkbox

additionally enables a read-write access on the Quadro for the

SNMP monitoring application. With this checkbox enabled,

administrator will be able to remotely configure the Quadro via

SNMP administrating program.

SNMP v1 / v2c Read-Write Community text field is used to

insert the community description (public, private, etc.) for the

read-write management (like gathering information (events,

statistics, etc.) about Quadro’s and remotely changing Quadro’s

configuration). Field may contain some kind of password which

should be matching both on Quadro and on the administrating

application for successful SNMP management.

Fig. II-56: Global SNMP Settings page

The Service Restart button restarts the SNMP sub-system on the Quadro. Restarting the SNMP sub-system is recommended if it does not respond

to a SNMP manager's requests.

SNMP Trap Settings are used to define the traphosts that

should be informed when certain events occur on the Quadro.

For the listed traphosts to be informed about the events on the

Quadro, Send SNMP Trap action should be configured for the

corresponding event(s) from the Events

page.

SNMP Trap Settings page contains a list of all configured

traphosts with the referring information.

Fig. II-57: SNMP Trap Settings page

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 149 150

Comments to this Manuals

No comments

Quadro Quadro16xi Installation Guide Page 34

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro16xi