Quadro Quadro16xi Installation Guide download pdf (Page 37)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 36

Automatic Provisioning

Automatic Provisioning provides the possibility to automatically

configure the WAN network settings of Quadro. This is very useful

when the administrator is not actually aware about the Quadro’s

network settings. Automatic Provisioning automatically detects

the matching network configuration settings, applies them on the

Quadro, thus connecting the device to the internet through the

available ISP connection.

Please Note: Automatic Provisioning can only be run from the

LAN side of the Quadro, i.e. from the PC connected to the

Quadro’s LAN.

Automatic Provisioning automatically detects and configures the

following settings on the Quadro:

• WAN interface type (PPPoE or Ethernet)

• WAN IP settings

• PPP settings

• ISP settings

• DHCP settings

• DNS settings

• NAT Traversal settings

Fig. II-63: Auto Provisioning page

Features

This page lists all features that may be activated by a software key, characterized by a Feature Description and provided with its Status:

• No Key Found - the feature is currently not available

• Reboot Needed - the feature key has been entered and Quadro needs to be rebooted

• Activated - the feature is now available on the Quadro

Following features may be activated via the software key:

• IP Phone support - enables additional LAN-sided IP phones on the Quadro. On Quadro4x and quadro16x models, this feature key allows

you to activate two packages of 16 IP lines support. The feature key inserted once will activate additional 16 IP lines. The feature key

inserted twice will activate additional 32 IP lines. On Quadro2x models, this feature allows to activate 8 IP lines support with a single key.

• Debug – enables Telnet connection towards the Quadro for debugging purposes.

• 3pcc Support - enables Third Party Call Control feature on

the Quadro. The feature allows the call controlling

applications running on a user PC to remotely initiate and

handle calls on the Quadro and to subscribe for certain

event notifications from the Quadro.

• G729 Support – enables G.729 codec support on the

Quadro. When the key is entered, up to 2 additional G.729

codec licenses are added on Quadro2x models and up to 6

additional G.729 codec licenses are added on Quadro4x

models. For other Quadro models, no additional G.729

codec licenses are available at the moment. This codec

allows placing calls with low bandwidth, therefore less

traffic is used.

Please Note: Quadro uses a G.729 license for:

• - G.729 calls from external SIP destinations to local PBX

extensions and vice versa,

• - G.729 calls from external SIP destinations to PSTN

lines attached to the Quadro and vice versa,

• - G.729 calls from external SIP destinations to Quadro’s

Auto Attendant,

• - Voice mail session access from external SIP

destination using G.729.

• - External SIP calls to or from IP phones attached to the

Quadro do not use a G.729 license.

Fig. II-64: Features page

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 149 150

Comments to this Manuals

No comments

Quadro Quadro16xi Installation Guide Page 37

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro16xi