Quadro Quadro16xi Installation Guide download pdf (Page 102)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 101

The Number of Discarded Symbols (NDS) text field requires the number of digits that should be discarded from the beginning of the Source

Number Pattern. The field should be empty if digits do not need to be discarded. Only numeric values are allowed for this field, otherwise the error

message “Error: Number of Discarded Symbols is incorrect - digits allowed only” will appear.

The Prefix text field requires entering the symbols (alphanumerics and any characters supported in the SIP username) that will be placed in front of

the Source Number Pattern instead of the discarded digits. (For example, if the routing pattern is 12345, the Number of Discarded Symbols is two,

nd the prefix digits are 909, the final phone number will be 909345.) Wildcards are allowed here.

ny non-numeric symbols from the Source Number Pattern.

ID with the custom display name for the corresponding routing rule. This field is

ft empty, an original caller ID will be displayed on the called destination’s phone, otherwise the name inserted here will

ll type routing rules.

e checkbox is used to remove caller IDs from calls made with this routing rule. This field is not available for PBX-

rent information about source caller will be required depending on the

SIP source type, the Source Host text field will require one or more IP addresses or host names of the SIP server

egistered, or the caller’s device if they are direct calls, separated by a space. If the FXO or ISDN source types are selected, the

mber or ISDN Trunk correspondingly, and in the next step, a list of timeslot(s)

used to receive calls from the defined caller.

Period(s checkbox

Local Call

pattern valid

sed to select the frequency of the corresponding routing

• Monthly – the calendar day should be selected for

The Discard Non-Numeric Symbols checkbox is used to discard a

The Display Name text field allows you to replace an original caller’s

optional and when it is le

appear on the phone. This field is not available for PBX-Voicemail ca

The Remove Display Nam

Voicemail call type routing rules.

The Next button will open the Call Routing Wizard - Page 4 where diffe

selected Sou pe. For the rce Ty

where the caller is r

Source Port ID drop down list will require selecting the FXO line nu

The Call Routing Wizard - Page 5 appears if the Set Date / Time

) was previously enabled on Page 1 of the

Routing Wizard. It will require information about the

ity period(s).

This page provides selection between Typical and Custom

date/time rule definitions.

The Typical selection contains the following group of radio buttons

that are u

pattern that is to take place:

• Daily

• Weekly – the preferred weekday(s) should

selected for this option.

this option.

• Annually – the calendar day and month should be

selected for this option.

In the Available Time Period drop down lists, the time range of

the pattern validation should be defined. Any time selected in this

field will be considered corresponding to the Quadro’s Time/Date

Settings

validity

date/ti

The Custom selection provides the option to manually define the

period(s). Use the following format to insert pattern

me rule(s):

[Month,Month-Month,...][Day-Day,Day,...][hh:mm-hh:mm,...]; ...

Fig. II-175: Call Routing Wizard - page 5

The zard - Page

Debug Opt

on Pag 1

information

his page offers result options of the corresponding routing rule

Call Routing Wi 6 appears if the Set Tracing /

ions on This Rule checkbox was previously enabled

e of the Local Call Routing Wizard. It will require

about the tracing/debug options.

execution when the notification event will be printed in the Events

page.

• In Case of Successful Call – a notification event is

printed when the successful call was established with

the routing rule.

• In Case of Failover – a notification event is printed

when the call ends up on one of the failover reasons

selected on the Page 2 of the Local Call Routing

Wizard.

• In Case if Call Failed to Establish – a notification

event is printed when the call executed with the

routing rule failed.

Fig. II-176: Call Routing Wizard – page 6

Please Note: Established patterns based on the Emergency Codes and PSTN Access Codes Settings in the System Configuration Wizard

will be

marked in bold and will be placed in the first position in the Call Routing Table. Additionally, they cannot be modified and deleted from the Call

Routing Table.

The Duplicate functional button is used to create a routing pattern with the settings of an exiting one. This is to avoid configuring a new routing entry

completely by duplicating an existing entry with different settings. To use the Duplicate button only one record may be selected, otherwise the error

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 149 150

Comments to this Manuals

No comments

Quadro Quadro16xi Installation Guide Page 102

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro16xi