Quadro Quadro16xi Installation Guide download pdf (Page 99)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 98

• PBX-Intercom - local calls to PBX extensions with the request of Intercom service.

• SIP – calls through a SIP server

• SIP_Tunnel – calls through a SIP tunnels established (see SIP Tunnel Settings)

• IP-PSTN – calls through the IP-PSTN provider to the remote PSTN global telephone network

om 0 to 20. If a value is not inserted into this field, 10 will be used as the default. If

r metric will be chosen.

uting pattern.

ws limiting the functionality of the current route to be used by the defined caller(s)

e Number Pattern, Source Type, Source Host, etc.) will be required later in the

y period(s) for current routing patterns to take place and to define

Call Routing Wizard - Page 5 will be displayed.

switch events notification on the certain execution results of the corresponding

ard - Page 6 will be displayed.

to enable administrator’s password authentication when enabler/disabler keys are

from the handset (see Feature Codes in Manual III - Extension Users Guide) or

s Guide). When this checkbox is selected, administrator’s

le(s). If the administrator’s password has been inserted incorrectly for 3 times, no

to those which have no authorization enabled.

Key text fields request digit combination which should be dialed from the handset or Auto Attendant to enable or disable

s you to select the extension (also

eep original DID

Add Remote Party ID is selected, the

• FXO – calls to a PSTN global telephone network

• ISDN – calls to a ISDN global telephone network

Metric allows entering a rating for the selected route in a range fr

two route entries match a user’s dial string, the route with the lowe

The Description text field requires an optional description of the ro

The Filter on Source / Modify Caller ID checkbox selection allo

only. If this checkbox is enabled, source caller information (Sourc

Call Routing Wizard. This option is enabled by default.

The Set Date / Time Period(s) checkbox selection allows you to define a validit

pattern date/time rules. When this checkbox is enabled, the

Set Tracing / Debug Options on This Rule checkbox is used to

routing rule. When this checkbox is enabled, the Call Routing Wiz

Require Authorization for Enabling/Disabling checkbox is used

onfigured for the routing rule. The service can be used locallyc

remotely from Auto Attendant (see Auto Attendant Services in Manual III - Extension User

password will be requested to enable/disable the certain routing ru

status changes will be applied to any of the routing record(s), even

nabler Key and Disabler E

the certain routing rules in the Call Routing Table. You can set the same Enabler/Disabler Key for multiple routing rules (the same key may be used

as enabler for one routing rule, and as disabler for another one) - this will allow managing several routing rules with the single key.

The second page of the Call Routing Wizard offers different

components depending on the Destination Type selected on

the previous page.

Use Extension Settings drop down list is applicable to SIP and

IP-PSTN call types and allow

Auto Attendant) on behalf of the call that will be placed. The SIP

settings of the selected extension will be used as the caller

information. If an entry is not selected from this list, the original

caller information will be kept. When K

checkbox is selected, the called destination will receive the

original caller’s information and not the information of the

extension selected from the Use Extension Settings list.

When the checkbox

Remote-Party-ID parameter is being delivered to the destination

side upon call establishment procedure.

SIP Tunnel drop-down list appears only when the “SIP_Tunnel”

Destination Type is selected on the previous page. The list is

used to select the particular SIP tunnel to route the calls through

the corresponding Quadro.

Fig. II-172: Call Routing Wizard - page 2

Destination Host requires the IP address or the host name of the destination (for a direct call) or the SIP server (for calls through the SIP ser

This field is named Modified Destination Host if the Destination Number Pattern field on the first page of this wizard contains “@” symbol.

ver).

e first page of this wizard contains “@” symbol.

ern activity timeout (in the range from 1 to 180

Destination Port requires the port number of the destination or of the SIP server. This field is named Modified Destination Port if the Destination

Number Pattern field on th

User Name and Password require the identification settings for the public SIP server or servers requiring authentication.

Enable Activity Timeout checkbox is used to limit time-to-live period of routing pattern (makes sense if accept or failure feedback arrives too late

from the destination).

Checkbox selection enables the Activity Timeout text field which is used to insert a routing patt

seconds). When timeout is configured, the routing pattern will be active within the defined time frame and if no response has been received from the

destination during that period, the pattern will be stopped and next routing rule might be optionally considered (depending on the Fail Reason

configuration on the corresponding pattern).

The Restrict the Number of Simultaneous Calls checkbox is only available for IP-PSTN call type and is used to restrict the number of

simultaneous calls to the public SIP server with the same username at the same time. This checkbox enables Allowed Call Count text field which

requires the number of simultaneous calls allowed in a range from 1 to 64. If you leave this field empty, no limitation will apply to the number of

simultaneous logons.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 149 150

Comments to this Manuals

No comments

Quadro Quadro16xi Installation Guide Page 99

Comments to this Manuals

Related products and manuals for Premise Branch Exchange (PBX) systems Quadro Quadro16xi